Microsoft
Software
Hardware
Network
Question : Can't boot from secondary plex standalone
Hi guys
I have a server which had 2 physical hard drives. These were dynamic disks and there was set a software mirror.
When I used the primary plex and booted from it previously, it was showing 2 options for booting. The problem is that the primary plex died and we only have secondary plex.
However, it is not booting from it, only cursor is blinking. Also, I used a fresh Windows 2003 server installation from another physical disk and I modified boot.ini there to boot from disk 1, partition 1 and it works like that. However, the secondary plex I am booting from reports as boot, where the fresh installation shows system.
What can I do to make the secondary plex bootable so I can use a fresh hard drive and mirror it back?
Thanks
Answer : Can't boot from secondary plex standalone
Hi guys
the secondary plex partition was damaged so we decided to do a rebuild.
Thanks
Random Solutions
unzip
security tool removal
Special Values in VBA
Word VBA, Loop through all words in a document
add commas for select query
Export Question
Work group servers cannot ping 2008 R2 domain controller or access DNS
loop results within output query
Recover data from *.mdf and *.ldf files!!
Exchange 2010 Management Console connects to the wrong server